Andatech Prodigy S

  • Advanced fuel cell workplace breathalyzer
  • Australian Standards AS3547 Certified
  • Comprehensive record entry for each test
  • Clean air test before each test
  • Calibration reminders
  • Clean and hygienic mouthpiece ejection
  • Large internal memory

Options available:

  • Andatech Prodigy S
  • Andatech Prodigy S Print Pack (Bluetooth-Enabled)
SKU: ALS-PRODIGY-S Category:
  • Fast and Accurate

    The Andatech FXCell3 advanced fuel cell sensor is designed for exceptional accuracy and long lifespan for high volume testing. The Prodigy S also provides lightning fast results – with only 2 seconds warm up time and 3 seconds response time.

    Highly Accurate Readings
    Provides accurate 3 decimal place readings ranging from 0.000 to 0.400%BAC at an accuracy of +/- 0.005%BAC

    Fast Results and Passive Testing (Fast Mode)
    Used with a sampling cup, passive testing mode provides even faster results when testing multiple individuals.

    New and Improved

    Easier-to-use User Interface

    Unlimited tests between calibrations

    Test records can be uploaded to our server for easier centralised access by company HR or OHS managers

    Independently Tested with Impressive Results

    A major police laboratory in Australia independently tested the Andatech Prodigy S breathalyser and sent us the results.

    Tested on two occassions against controlled alcohol solutions at varying BAC concentrations, the Prodigy S consistently gave results that were well within the accuracy range of ±0.005%BAC.

    Its accuracy remained consistent even when it was used consecutively with just one minute apart from each test!

    See the results below.

    Touch Screen
    Enter details, change information, and navigate between operations quickly and easily using either your fingers or the included stylus pen on the breathalyser’s clear 2.4” TFT colour touch screen.

    Specific Data Input and Fields
    Customise test record information as you go. Include information such as vehicle number, department and more. You can also pre-fill specific fields or enter your own custom fields to suit your company’s needs.

    Workplace Breathalyser
    Improved user interface, passive testing, and data upload included at no extra cost, making the Prodigy S the best choice for workplace employee testing.

    Quality Assured
    DOT approved and Australian Standards AS3547 certified.

    Clean and Hygienic
    Designed with a button to remove the mouthpiece from the device without needing to touch the mouthpiece, making testing completely sanitary. Each mouthpiece and sampling cup also comes individually wrapped for maximum hygiene.

    Advanced Functions and Settings

    Clean Air Test
    Before a test, the Prodigy S will take a clean air sample to ensure the mouthpiece and sensor are clear of alcohol from any previous tests.

    Re-Test Prompts
    The operator can select “Refuse” if the subject refused to take a test or “Discontinue” to abandon a test if the subject did not blow with sufficient force. These are also documented in the test record.

    Calibration Statistics
    Easily keep track of the breathalyser’s calibration statistics at any time through the settings menu.

    Calibration Reminder
    Alerts you when calibration is due when you start up the breathalyser. Default 6 month calibration reminder can also be changed to 12 months at the time of purchase (by request).

    Large Internal Memory
    The Prodigy S has a large internal storage capacity for up to 10,000 entries, depending on the type of data collected.

    USB Connectivity
    USB Functionality for downloading and exporting data to a PC, so you can easily store all employee data and history. The USB plug-in is also used to upgrade the unit’s software.

    Convenient On-Site Testing
    Comes in a hard carry case for easy storage and portability. Super handy for bringing the breathalyser kit around for onsite alcohol testing. And if your Prodigy S happens to run out of battery onsite, you can power it up from your car using the included 12V car adapter.

    *Printer cannot be purchased separately and must be purchased as the Prodigy S Print Pack.

    Andatech Prodigy S Print Pack Version*
    Alternatively, purchase the Prodigy S Print Pack version, which comes with a bluetooth wireless printer for printing test results on-the-spot.

  • Specifications

    BAC Range 0.000% – 0.400%BAC
    Sensor Type FxCell3
    Accuracy ±0.005%BAC at 0.100%BAC
    Warm Up Time Within 2 seconds
    Response Time Within 3 seconds
    Recycle Time 5 seconds
    Working Temperature (-)10 – 50°C
    Power Supply 4 x AA Batteries (Alkaline Only)
    Mouthpieces 5 mouthpieces supplied (please note this unit is only compatible with AlcoSense mouthpieces), sampling Cup
    Memory Capacity 10000 tests
    Result Reading 0.000% – 0.400%BAC

    Result readings can also be changed to the following BAC and BrAC formats. Please specify this at the time of purchase or during calibration:

    BAC
    0.000 ~ 4.000 ‰
    0.000 ~ 0.400%BAC
    0~40.0 mg/100ml

    BrAC
    0.000 ~ 2.000 mg/l BrAC
    0.000 ~ 4.000 g/l
    0~200μg/100ml
    0~2000μg/l

    Certification Australian Standard AS3547
    Calibration Frequency Unlimited tests, every 6 months
    Display 2.4 inch TFT Touch Screen
    Features 3 decimal place reading, flow control, auto power off, battery low indicator, passive/fast mode, test counter, memory function, designed for mass testing, PC compatible
    Includes User manual, mouthpieces, carry pouch, carry case, sampling cup, car adapter, micro USB cable
    Product Weight 265g including batteries
    Dimensions H:140mm, W: 65mm, D: 32mm
    Warranty 1 year
  • Downloads

You may also like…